a
LTC-25iS opposed twin spindle turning centre
capacity
maximum swing: 615mm (24.2”)
maximum turning diameter: 610mm (24”)
maximum turning length: 770mm (30.3”)
travel
X-axis with heavy duty box guide ways: 305 + 10mm (12.01” + 0.4”)
Z1-axis with heavy duty box guide ways: 800mm (31.5”)
Z2-axis with heavy duty box guide ways: 780mm (30.7”)
left spindle
spindle nose: A2-8
maximum spindle speed: 4000 rpm
spindle motor: 22kW (30 hp)
hydraulic 3-jaw chuck diameter: 12”
bar capacity: 85mm (3.35”)
right spindle
spindle nose: A2-8
maximum spindle speed: 4000 rpm
spindle motor: 18.5kW (25 hp)
hydraulic 3-jaw chuck diameter : 12”
tool turret
number of tool stations: 12
turning tool shank: 25.4mm (1”) square
boring bar diameter: 50.8mm (2”) diameter
turret indexing time to adjacent tool station: 1.3 seconds
turret indexing time 180°: 3.1 seconds
rapid feed rate
X-axis rapid feed rate: 15m per minute (590” per minute)
Z1-axis rapid feed rate: 20m per minute (787” per minute)
Z2-axis rapid feed rate: 20m per minute (787” per minute)
general
machine length with chip conveyor x width x height: 5080 x 2085 x 2365mm (200” x 82.1” x 93.1”)
machine weight: 8900kg (19,621 lbs.)
standard + included equipment
Fanuc 0i-TF Plus control
12” hydraulic 3-jaw chucks with a set of soft and hard jaws on the left + right spindles
automatic Renishaw tool setter on the left spindle
chain type chip conveyor with chip bucket
4bar high pressure coolant system
auto lubrication system
work light
heat exchanger for electrical cabinet
foot switch for chuck open/close
manual pulse generator (MPG = electronic handwheel)
tool holder package
machine + control e-manuals
maximum swing: 615mm (24.2”)
maximum turning diameter: 610mm (24”)
maximum turning length: 770mm (30.3”)
travel
X-axis with heavy duty box guide ways: 305 + 10mm (12.01” + 0.4”)
Z1-axis with heavy duty box guide ways: 800mm (31.5”)
Z2-axis with heavy duty box guide ways: 780mm (30.7”)
left spindle
spindle nose: A2-8
maximum spindle speed: 4000 rpm
spindle motor: 22kW (30 hp)
hydraulic 3-jaw chuck diameter: 12”
bar capacity: 85mm (3.35”)
right spindle
spindle nose: A2-8
maximum spindle speed: 4000 rpm
spindle motor: 18.5kW (25 hp)
hydraulic 3-jaw chuck diameter : 12”
tool turret
number of tool stations: 12
turning tool shank: 25.4mm (1”) square
boring bar diameter: 50.8mm (2”) diameter
turret indexing time to adjacent tool station: 1.3 seconds
turret indexing time 180°: 3.1 seconds
rapid feed rate
X-axis rapid feed rate: 15m per minute (590” per minute)
Z1-axis rapid feed rate: 20m per minute (787” per minute)
Z2-axis rapid feed rate: 20m per minute (787” per minute)
general
machine length with chip conveyor x width x height: 5080 x 2085 x 2365mm (200” x 82.1” x 93.1”)
machine weight: 8900kg (19,621 lbs.)
standard + included equipment
Fanuc 0i-TF Plus control
12” hydraulic 3-jaw chucks with a set of soft and hard jaws on the left + right spindles
automatic Renishaw tool setter on the left spindle
chain type chip conveyor with chip bucket
4bar high pressure coolant system
auto lubrication system
work light
heat exchanger for electrical cabinet
foot switch for chuck open/close
manual pulse generator (MPG = electronic handwheel)
tool holder package
machine + control e-manuals
the Leadwell LTC-25iS turning centre walk-around pictures
(at the Masteel Oakville metalworking technology warehouse)
(at the Masteel Oakville metalworking technology warehouse)
the Leadwell LTC-25i turning centre brochure
the Fanuc 0i-model F Plus control brochure
