a
T-6SMY turning centre with main + sub-spindle + Y-axis rotary tool turret
(machine "A" is in the Masteel Oakville, Ontario warehouse)
(machine "B" is in the Delta, British Columbia warehouse)
(machine "A" is in the Masteel Oakville, Ontario warehouse)
(machine "B" is in the Delta, British Columbia warehouse)
capacity
maximum swing: 450mm (17.7”)
maximum turning diameter: 410mm (16.1”)
maximum turning length: 458mm (18”)
travel
X-axis: 190 + 15mm (7.48” + 0.59”)
Y-axis: ±50mm (±1.96”)
Z1-axis: 450mm (17.7”)
Z2-axis: 500mm (19.68”)
C1-axis: 360° in 360,000 positions
C2-axis: 360° in 360,000 positions
main spindle machine “A”
main spindle nose: A2-6
maximum main spindle speed: 4000 rpm
main spindle bar capacity: 52mm (2”)
maximum main spindle power: 11/15kW (14.75/20 hp)
hydraulic chuck diameter: 6.88”
C-axis minimum spindle indexing increment: ±0.001°
main spindle machine “B”
main spindle nose: A2-6
maximum main spindle speed: 4000 rpm
main spindle bar capacity: 65mm (2.55”)
maximum main spindle power: 11/15kW (14.75/20 hp)
hydraulic chuck diameter: 8”
C-axis minimum spindle indexing increment: ±0.001°
sub-spindle machine “A”
sub-spindle nose: A2-5
maximum sub-spindle speed: 6,000 rpm
sub-spindle bar capacity: 41.275mm (1.625”)
maximum sub-spindle power: 5.5/7.5kW (7.4/10 hp)
hydraulic chuck diameter: 6”
C-axis minimum spindle indexing increment: ±0.001 degree
sub-spindle machine “B”
sub-spindle nose: A2-6
maximum sub-spindle speed: 4,500 rpm
sub-spindle bar capacity: 41.275mm (1.625”)
maximum sub-spindle power: 5.5/7.5kW (7.4/10 hp)
hydraulic chuck diameter: 175mm (6.88”)
C-axis minimum spindle indexing increment: ±0.001°
Y-axis rotary tool turret
number of tool stations: 12
tool holder type: EWS BMT55
square tool shank size: 20mm (0.8”)
boring bar holder inside shank diameter: 32mm (1.3”)
maximum rotary tool speed: 4,000 rpm
maximum rotary tool motor power: 3kW (4 hp)
maximum rotary tool motor torque: 46Nm (34 ft-lbs)
rapid feed rate
X-axis: 15m per minute (590” per minute)
Y-axis: 7.5m per minute (295” per minute)
Z1-axis: 30m per minute (1181” per minute)
Z2-axis: 30m per minute (1181” per minute)
accuracy
X/Z-axis positioning accuracy over 1000mm: ±0.015mm (±0.0006”)
X/Z-axis repeatability: 0.01mm (0.0004”)
bed + slide
overall bed guide width: 332mm (13”)
cross slide guide width: 231mm (9”)
Y-axis guide width: 231mm (9”)
angle of bed: 45 degrees
feed motors
X/Y-axis motor power: 2.3kW (3 hp)
Z-axis motor power: 3.5kW (4.7 hp)
X/Y-axis motor static torque: 11.56Nm (8.5 ft-lbs)
Z-axis motor static torque: 16.46Nm (12.1 ft-lbs)
ball screws
X/Y/Z-axis diameter x pitch: 32mm x P10 / 32mm x P5 / 32mm x P10
general
electric power supply: 400V / 40kVa
machine length x width x height: 3014 x 2060 x 2000mm (118.6” x 81.1” x 78.7”)
machine weight : 4600kg (10,141 lbs.)
standard + included equipment
Fagor 8060 control
8” main spindle hydraulic 3-jaw chuck
6” sub-spindle hydraulic 3-jaw chuck
fully enclosed guarding
work light
leveling screws + pads
maintenance tool box
foot pedal switch
bullet proof glass window
high/low pressure control on the main spindle hydraulic chuck
Renishaw automatic tool setter on the main spindle
chip conveyor with cart
tool holder package:
- two (2) radial rotary tool holders
- two (2) axial rotary tool holders
- four (4) boring bar holders
- four (4) turning tool holders
maximum swing: 450mm (17.7”)
maximum turning diameter: 410mm (16.1”)
maximum turning length: 458mm (18”)
travel
X-axis: 190 + 15mm (7.48” + 0.59”)
Y-axis: ±50mm (±1.96”)
Z1-axis: 450mm (17.7”)
Z2-axis: 500mm (19.68”)
C1-axis: 360° in 360,000 positions
C2-axis: 360° in 360,000 positions
main spindle machine “A”
main spindle nose: A2-6
maximum main spindle speed: 4000 rpm
main spindle bar capacity: 52mm (2”)
maximum main spindle power: 11/15kW (14.75/20 hp)
hydraulic chuck diameter: 6.88”
C-axis minimum spindle indexing increment: ±0.001°
main spindle machine “B”
main spindle nose: A2-6
maximum main spindle speed: 4000 rpm
main spindle bar capacity: 65mm (2.55”)
maximum main spindle power: 11/15kW (14.75/20 hp)
hydraulic chuck diameter: 8”
C-axis minimum spindle indexing increment: ±0.001°
sub-spindle machine “A”
sub-spindle nose: A2-5
maximum sub-spindle speed: 6,000 rpm
sub-spindle bar capacity: 41.275mm (1.625”)
maximum sub-spindle power: 5.5/7.5kW (7.4/10 hp)
hydraulic chuck diameter: 6”
C-axis minimum spindle indexing increment: ±0.001 degree
sub-spindle machine “B”
sub-spindle nose: A2-6
maximum sub-spindle speed: 4,500 rpm
sub-spindle bar capacity: 41.275mm (1.625”)
maximum sub-spindle power: 5.5/7.5kW (7.4/10 hp)
hydraulic chuck diameter: 175mm (6.88”)
C-axis minimum spindle indexing increment: ±0.001°
Y-axis rotary tool turret
number of tool stations: 12
tool holder type: EWS BMT55
square tool shank size: 20mm (0.8”)
boring bar holder inside shank diameter: 32mm (1.3”)
maximum rotary tool speed: 4,000 rpm
maximum rotary tool motor power: 3kW (4 hp)
maximum rotary tool motor torque: 46Nm (34 ft-lbs)
rapid feed rate
X-axis: 15m per minute (590” per minute)
Y-axis: 7.5m per minute (295” per minute)
Z1-axis: 30m per minute (1181” per minute)
Z2-axis: 30m per minute (1181” per minute)
accuracy
X/Z-axis positioning accuracy over 1000mm: ±0.015mm (±0.0006”)
X/Z-axis repeatability: 0.01mm (0.0004”)
bed + slide
overall bed guide width: 332mm (13”)
cross slide guide width: 231mm (9”)
Y-axis guide width: 231mm (9”)
angle of bed: 45 degrees
feed motors
X/Y-axis motor power: 2.3kW (3 hp)
Z-axis motor power: 3.5kW (4.7 hp)
X/Y-axis motor static torque: 11.56Nm (8.5 ft-lbs)
Z-axis motor static torque: 16.46Nm (12.1 ft-lbs)
ball screws
X/Y/Z-axis diameter x pitch: 32mm x P10 / 32mm x P5 / 32mm x P10
general
electric power supply: 400V / 40kVa
machine length x width x height: 3014 x 2060 x 2000mm (118.6” x 81.1” x 78.7”)
machine weight : 4600kg (10,141 lbs.)
standard + included equipment
Fagor 8060 control
8” main spindle hydraulic 3-jaw chuck
6” sub-spindle hydraulic 3-jaw chuck
fully enclosed guarding
work light
leveling screws + pads
maintenance tool box
foot pedal switch
bullet proof glass window
high/low pressure control on the main spindle hydraulic chuck
Renishaw automatic tool setter on the main spindle
chip conveyor with cart
tool holder package:
- two (2) radial rotary tool holders
- two (2) axial rotary tool holders
- four (4) boring bar holders
- four (4) turning tool holders
the orthogonal Y-axis benefits on the Leadwell T-6SMY turning centre
walk-around pictures of the Leadwell T-6SMY turning centre
the Leadwell T-6SMY turning centre brochure
the Fagor 8060 control brochure
