a
TM-1500 5-axis turning-machining centre
capacity
maximum swing: 790mm (31.1”)
maximum turning diameter: 780mm (30.7”)
maximum turning length: 1500mm (59”)
bar capacity: 177.8mm (7”)
maximum work piece weight with tailstock: 1200kg (2,645 lbs.)
travel
X-axis: 730 + 40mm (28.7” + 1.57”)
Y-axis: 400mm (±200mm) 15.74” (±7.87”)
Z-axis: 1550mm (61”)
B-axis: 240° (-10° to +230°)
C-axis: 360,000 positions
turning spindle
spindle nose: A2-15
maximum spindle speed: 1,500 rpm
spindle motor: 37-56kW (49-75 hp)
maximum spindle torque: 1250Nm (921 ft-lbs.)
hydraulic chuck diameter: 500mm (19.68”)
minimum spindle indexing increment: 0.001°
milling spindle
maximum spindle speed: 12,000 rpm
spindle to tool interface: Capto C6
through spindle hole diameter: 195mm (7.67”)
spindle motor: 25kW (33.5 hp)
maximum spindle torque: 103Nm (76 ft-lbs.)
spindle swiveling angle range: 240° (-10° to +230°)
b-axis (milling/turning head swiveling)
angular stroke: 240° (-10° to +230°)
minimum angular index clamping increment: 5°
minimum angular brake clamping increment: 0.0001°
maximum motor torque: 1080Nm (774 ft-lbs.)
automatic tool changers
tool shank: Capto C-6
main tool storage capacity: 60
maximum tool diameter with full pockets: 90mm (3.5”)
maximum tool diameter with empty adjacent pockets: 120mm (4.7”)
maximum tool length: 300mm (11.8”)
maximum tool weight: 8kg (17 lbs.)
tool-to-tool change time: 3 seconds
chip-to-chip tool change time: 20 seconds
secondary tool storage capacity for long boring bars: 3 (up to 500mm/19.68” long boring bar)
rapid feed rate
X-axis: 20m per minute (787” per minute)
Y-axis: 20m per minute (787” per minute)
Z-axis: 30m per minute (1181” per minute)
B-axis rapid feed rate: 100 rpm
feed motors
X-axis: 10.1kW (14.2 hp)
Y-axis: 10.1kW (14.2 hp)
Z-axis: 10.1kW (14.2 hp)
accuracy
X/Z-axis positioning accuracy over 300mm: ±0.005mm (±0.0002”)
X/Z-axis repeatability: 0.003mm (0.00012”)
bed + slide
X-axis overall bed guide width: 728mm (28.66”)
Y-axis overall bed guide width: 380mm (14.96”)
Z-axis overall bed guide width: 662mm (26.06”)
angle of bed: 0°
feed motors
X/Y/Z axis motor power: 10.6kW (14.2 hp)
X/Y/Z axis motor static torque: 33.6Nm (24.8 ft-lbs.)
ball screws
X-axis diameter x pitch: 45mm x P10
Y-axis diameter x pitch: 40mm x P10
Z-axis diameter x pitch: 50mm x P12
tailstock
tailstock movement type: servo
tailstock travel: 1550mm (61”)
quill movement type: hydraulic
quill travel: 125mm (4.9”)
quill diameter: 165mm (6.49”)
quill inside taper: MT#6
maximum thrust: 829Kgf (1827 lbf.)
hydraulic unit
pump motor: 2.2kW (3 hp)
pump capacity: 26l/minute (6.86 US gallon per minute)
tank capacity: 30l (7.9 US gallon)
general
power supply: 400V / 3 phase / 75kVa
machine length x width x height: 7000 x 4500 x 2900mm (275.6” x 177.2” x 114.2”)
machine weight: 18000kg (39,683 lbs.)
standard + included equipment
Fagor 8065 control with:
milling spindle air blast
20bar through the milling spindle coolant
milling spindle oil chiller
wash down system
oil skimmer
chain type chip conveyor
3 level status light
spindle + tailstock foot switch
air conditioner in electrical cabinet
X-Y-Z axis linear scale feed-back system
maximum swing: 790mm (31.1”)
maximum turning diameter: 780mm (30.7”)
maximum turning length: 1500mm (59”)
bar capacity: 177.8mm (7”)
maximum work piece weight with tailstock: 1200kg (2,645 lbs.)
travel
X-axis: 730 + 40mm (28.7” + 1.57”)
Y-axis: 400mm (±200mm) 15.74” (±7.87”)
Z-axis: 1550mm (61”)
B-axis: 240° (-10° to +230°)
C-axis: 360,000 positions
turning spindle
spindle nose: A2-15
maximum spindle speed: 1,500 rpm
spindle motor: 37-56kW (49-75 hp)
maximum spindle torque: 1250Nm (921 ft-lbs.)
hydraulic chuck diameter: 500mm (19.68”)
minimum spindle indexing increment: 0.001°
milling spindle
maximum spindle speed: 12,000 rpm
spindle to tool interface: Capto C6
through spindle hole diameter: 195mm (7.67”)
spindle motor: 25kW (33.5 hp)
maximum spindle torque: 103Nm (76 ft-lbs.)
spindle swiveling angle range: 240° (-10° to +230°)
b-axis (milling/turning head swiveling)
angular stroke: 240° (-10° to +230°)
minimum angular index clamping increment: 5°
minimum angular brake clamping increment: 0.0001°
maximum motor torque: 1080Nm (774 ft-lbs.)
automatic tool changers
tool shank: Capto C-6
main tool storage capacity: 60
maximum tool diameter with full pockets: 90mm (3.5”)
maximum tool diameter with empty adjacent pockets: 120mm (4.7”)
maximum tool length: 300mm (11.8”)
maximum tool weight: 8kg (17 lbs.)
tool-to-tool change time: 3 seconds
chip-to-chip tool change time: 20 seconds
secondary tool storage capacity for long boring bars: 3 (up to 500mm/19.68” long boring bar)
rapid feed rate
X-axis: 20m per minute (787” per minute)
Y-axis: 20m per minute (787” per minute)
Z-axis: 30m per minute (1181” per minute)
B-axis rapid feed rate: 100 rpm
feed motors
X-axis: 10.1kW (14.2 hp)
Y-axis: 10.1kW (14.2 hp)
Z-axis: 10.1kW (14.2 hp)
accuracy
X/Z-axis positioning accuracy over 300mm: ±0.005mm (±0.0002”)
X/Z-axis repeatability: 0.003mm (0.00012”)
bed + slide
X-axis overall bed guide width: 728mm (28.66”)
Y-axis overall bed guide width: 380mm (14.96”)
Z-axis overall bed guide width: 662mm (26.06”)
angle of bed: 0°
feed motors
X/Y/Z axis motor power: 10.6kW (14.2 hp)
X/Y/Z axis motor static torque: 33.6Nm (24.8 ft-lbs.)
ball screws
X-axis diameter x pitch: 45mm x P10
Y-axis diameter x pitch: 40mm x P10
Z-axis diameter x pitch: 50mm x P12
tailstock
tailstock movement type: servo
tailstock travel: 1550mm (61”)
quill movement type: hydraulic
quill travel: 125mm (4.9”)
quill diameter: 165mm (6.49”)
quill inside taper: MT#6
maximum thrust: 829Kgf (1827 lbf.)
hydraulic unit
pump motor: 2.2kW (3 hp)
pump capacity: 26l/minute (6.86 US gallon per minute)
tank capacity: 30l (7.9 US gallon)
general
power supply: 400V / 3 phase / 75kVa
machine length x width x height: 7000 x 4500 x 2900mm (275.6” x 177.2” x 114.2”)
machine weight: 18000kg (39,683 lbs.)
standard + included equipment
Fagor 8065 control with:
- conversational plus standard G-code programming (both can be run together in a single program)
- Fagor complete online conversational turning centre programming/operation course
- Fagor offline programming software
- Fagor Remote Support Program*
milling spindle air blast
20bar through the milling spindle coolant
milling spindle oil chiller
wash down system
oil skimmer
chain type chip conveyor
3 level status light
spindle + tailstock foot switch
air conditioner in electrical cabinet
X-Y-Z axis linear scale feed-back system
walk-around pictures of the Leadwell TM-1500 5-axis turning-machining centre
the Leadwell TM-1500 5-axis turning-machining centre brochure
the Fagor 8065 control brochure
© 2025 Masteel America Corporation / disclaimer + privacy