THE MACHINE BENEFITS
• one side 3-axis machining on the rectangular table with 20” x 16.14” rectangular table space next to the 2-axis 8” diameter CNC tilting rotary table
• full simultaneous 5-axis machining on the 2-axis 8” diameter CNC tilting rotary table
• 15” under the spindle for the 2-axis CNC tilting rotary table
• removable 2-axis 8” diameter CNC tilting rotary table for full travel one side 3-axis machining on the 35.43” x 16.14” rectangular table ground surface with 30” x 18” X/Y-axis travel
• full simultaneous 5-axis machining on the 2-axis 8” diameter CNC tilting rotary table
• 15” under the spindle for the 2-axis CNC tilting rotary table
• removable 2-axis 8” diameter CNC tilting rotary table for full travel one side 3-axis machining on the 35.43” x 16.14” rectangular table ground surface with 30” x 18” X/Y-axis travel
THE MACHINE SPECIFICATIONS
RECTANGULAR TABLE
table size: 3900 x 410mm
table height: 820mm
table load capacity: 350kg
2-AXIS TILING ROTARY TABLE
table diameter: 200mm
maximum table load capacity: 50kg horizontal from 0° to 45° / 35kg tilt from 45° to 90°
through-hole diameter: 30mm
minimum indexing angle: 0.001°
tilting angle range without fixture and work piece: from +30° to -120°
indexing angle accuracy: 60arc-sec / 60arc-sec
indexing angle repeatability: 6arc-sec / 8arc-sec
weight: 130kg
TRAVEL
X-axis: 760mm
Y-axis: 457mm
Z-axis: 508mm
A-axis (table tilting): from +30° to -120°
C-axis (table rotation): 360° at 0.001° minimum indexing angle
X/Y/Z-axis rapid traverse: 25.4m/minute
X/Y/Z-axis maximum cutting feed rate: 12.7m/minute
SPINDLE
taper: CAT#40
maximum speed: 12,000 rpm direct drive
from spindle centre to guide ways: 475mm
from spindle nose to table top: from 100 to 560mm
motor: 7.5kW
AUTOMATIC TOOL CHANGER
number of tool pockets: 24
tool taper: CAT#40
tool select by shortest path: bi-directional
maximum tool diameter with adjacent empty pockets: 130mm
maximum tool diameter with adjacent full pockets: 100mm
maximum tool length: 300mm
maximum tool weight: 8kg
maximum total weight capacity: 128kg
TESTED LINEAR ACCURACY + REPEATABILITY
X-axis accuracy factory test result: +0.002257mm -0.002915mm
X-axis repeatability factory test result: 0.000668mm
Y-axis accuracy factory test result: +0.001399mm -0.001093mm
Y-axis repeatability factory test result: 0.000632mm
Z-axis accuracy factory test result: +0.001263mm -0.001523mm
Z-axis repeatability factory test result: 0.000637mm
GENERAL
machine length x width x height: 2200 x 2040 x 2500mm
machine weight: 3650kg
electric power: 400V
RECTANGULAR TABLE
table size: 3900 x 410mm
table height: 820mm
table load capacity: 350kg
2-AXIS TILING ROTARY TABLE
table diameter: 200mm
maximum table load capacity: 50kg horizontal from 0° to 45° / 35kg tilt from 45° to 90°
through-hole diameter: 30mm
minimum indexing angle: 0.001°
tilting angle range without fixture and work piece: from +30° to -120°
indexing angle accuracy: 60arc-sec / 60arc-sec
indexing angle repeatability: 6arc-sec / 8arc-sec
weight: 130kg
TRAVEL
X-axis: 760mm
Y-axis: 457mm
Z-axis: 508mm
A-axis (table tilting): from +30° to -120°
C-axis (table rotation): 360° at 0.001° minimum indexing angle
X/Y/Z-axis rapid traverse: 25.4m/minute
X/Y/Z-axis maximum cutting feed rate: 12.7m/minute
SPINDLE
taper: CAT#40
maximum speed: 12,000 rpm direct drive
from spindle centre to guide ways: 475mm
from spindle nose to table top: from 100 to 560mm
motor: 7.5kW
AUTOMATIC TOOL CHANGER
number of tool pockets: 24
tool taper: CAT#40
tool select by shortest path: bi-directional
maximum tool diameter with adjacent empty pockets: 130mm
maximum tool diameter with adjacent full pockets: 100mm
maximum tool length: 300mm
maximum tool weight: 8kg
maximum total weight capacity: 128kg
TESTED LINEAR ACCURACY + REPEATABILITY
X-axis accuracy factory test result: +0.002257mm -0.002915mm
X-axis repeatability factory test result: 0.000668mm
Y-axis accuracy factory test result: +0.001399mm -0.001093mm
Y-axis repeatability factory test result: 0.000632mm
Z-axis accuracy factory test result: +0.001263mm -0.001523mm
Z-axis repeatability factory test result: 0.000637mm
GENERAL
machine length x width x height: 2200 x 2040 x 2500mm
machine weight: 3650kg
electric power: 400V
STANDARD + INCLUDED EQUIPMENT
• Fagor 8065 POWER control with:
- simultaneous 5-axis operation
- 15” colour LCD
- high level microprocessor with 1GB ram + 8 GB compact flash
- software for milling
- HD graphics software
- Fagor Collision Avoidance System (FCAS) software
- Kinematics Calibration software
- dynamic Rotation Tool Centre Point (RTCP) software
- High Speed Surface Accuracy (HSSA) software
- interactive icon-based pages programming system
- canned cycles for probing software
- DXF file upload for conversational programming with profile editor
- tool life management
- telediagnostics with on-line Fagor remote support for on-line trouble shooting through TeamViewer
machine internet connection with the Fagor office in Mississauga during the warranty period
- free off-line Fagor 8065 programming software on customer’s Windows based computer
• large fully ground work table with four (4) t-slots
• 2-axis 200mm diameter CNC tilting rotary table
• 12,000 rpm direct drive spindle
• automatic lubrication with low lubrication alarm
• coolant system with check valve + wash down coolant flush
+ 20bar through the spindle coolant + 210l coolant tank
• linear way system for high rapid / high accuracy traverse at all the axes
• full enclosure & heavy metal guarding with removable side doors
• telescopic way covers
• low voltage circuit system
• heat exchanger
• Renishaw RMP60 radio controlled part probe + RTS radio controlled tool probe system
• Fagor 8065 POWER control with:
- simultaneous 5-axis operation
- 15” colour LCD
- high level microprocessor with 1GB ram + 8 GB compact flash
- software for milling
- HD graphics software
- Fagor Collision Avoidance System (FCAS) software
- Kinematics Calibration software
- dynamic Rotation Tool Centre Point (RTCP) software
- High Speed Surface Accuracy (HSSA) software
- interactive icon-based pages programming system
- canned cycles for probing software
- DXF file upload for conversational programming with profile editor
- tool life management
- telediagnostics with on-line Fagor remote support for on-line trouble shooting through TeamViewer
machine internet connection with the Fagor office in Mississauga during the warranty period
- free off-line Fagor 8065 programming software on customer’s Windows based computer
• large fully ground work table with four (4) t-slots
• 2-axis 200mm diameter CNC tilting rotary table
• 12,000 rpm direct drive spindle
• automatic lubrication with low lubrication alarm
• coolant system with check valve + wash down coolant flush
+ 20bar through the spindle coolant + 210l coolant tank
• linear way system for high rapid / high accuracy traverse at all the axes
• full enclosure & heavy metal guarding with removable side doors
• telescopic way covers
• low voltage circuit system
• heat exchanger
• Renishaw RMP60 radio controlled part probe + RTS radio controlled tool probe system
THE MACHINE LAY-OUT
THE FAGOR 8065 CONTROL BROCHURE
FAGOR FCAS REAL-TIME MONITORING AND COLLISION AVOIDANCE
