THE MACHINE SPECIFICATIONS
TABLE
table size: 35.43” x 16.14”
distance between table and floor: 32.28”
table load capacity: 770 lbs.
TRAVEL
X-axis: 30”
Y-axis: 18”
Z-axis: 20”
X/Y-axis motor torque: 2 ft-lbs
Z-axis motor torque: 6.15 ft-lbs
X/Y/Z-axis rapid traverse: 1000”/minute
X/Y/Z-axis maximum cutting feed rate: 500”/minute
SPINDLE
taper: CAT#40
maximum power / speed / drive system: 7.5/10 hp / 10,000 rpm / belt drive
spindle centre to guide ways: 18.9”
spindle nose to table top motor: 4” - 24”
AUTOMATIC TOOL CHANGER
number of tool pockets: 24
tool taper: CAT#40
tool select: by shortest path bi-directional
maximum tool diameter with adjacent empty pockets: 5.12”
maximum tool diameter with adjacent full pockets: 3.5”
maximum tool length: 13.77”
maximum tool weight :17.6 lbs.
ACCURACY
linear axes positioning accuracy: ±0.0002”
linear axes repeatability: 0.00008”
GENERAL
length x width x height: 86.6” x 80.7” x 98.5”
weight: 7986 lbs.
TABLE
table size: 35.43” x 16.14”
distance between table and floor: 32.28”
table load capacity: 770 lbs.
TRAVEL
X-axis: 30”
Y-axis: 18”
Z-axis: 20”
X/Y-axis motor torque: 2 ft-lbs
Z-axis motor torque: 6.15 ft-lbs
X/Y/Z-axis rapid traverse: 1000”/minute
X/Y/Z-axis maximum cutting feed rate: 500”/minute
SPINDLE
taper: CAT#40
maximum power / speed / drive system: 7.5/10 hp / 10,000 rpm / belt drive
spindle centre to guide ways: 18.9”
spindle nose to table top motor: 4” - 24”
AUTOMATIC TOOL CHANGER
number of tool pockets: 24
tool taper: CAT#40
tool select: by shortest path bi-directional
maximum tool diameter with adjacent empty pockets: 5.12”
maximum tool diameter with adjacent full pockets: 3.5”
maximum tool length: 13.77”
maximum tool weight :17.6 lbs.
ACCURACY
linear axes positioning accuracy: ±0.0002”
linear axes repeatability: 0.00008”
GENERAL
length x width x height: 86.6” x 80.7” x 98.5”
weight: 7986 lbs.
STANDARD + INCLUDED EQUIPMENT
• Fagor 8055 or Fagor 8065 or Fanuc 0i-MF control
• large fully ground work table with four (4) t-slots
• automatic lubrication with low lubrication alarm
• coolant system with check valve + wash down coolant flush + 20bar through the spindle coolant + 210l coolant tank
• linear way system for high rapid / high accuracy traverse on all the three (3) axes
• full enclosure & heavy metal guarding with removable side doors for high accessibility
• telescopic way covers
• low voltage circuit system
• heat exchanger
• Fagor 8055 or Fagor 8065 or Fanuc 0i-MF control
• large fully ground work table with four (4) t-slots
• automatic lubrication with low lubrication alarm
• coolant system with check valve + wash down coolant flush + 20bar through the spindle coolant + 210l coolant tank
• linear way system for high rapid / high accuracy traverse on all the three (3) axes
• full enclosure & heavy metal guarding with removable side doors for high accessibility
• telescopic way covers
• low voltage circuit system
• heat exchanger
THE MAXCUT MV-1830 VERTICAL MACHINING CENTRE WORK AREA ACCESSIBILITY
THE MAXCUT MV-1830 VERTICAL MACHINING CENTRE LAY-OUT
THE MAXCUT MV-1830 VERTICAL MACHINING CENTRE CONTROL BROCHURES
