a UDM-3218E double column vertical machining centre
Specifications
Table
table size / t-slots: 3000 x 1500mm (118.1” x 59”) / 22
maximum load capacity: 9000kg (19,841 lbs.)
Travel
X-axis: 3200mm (126”)
Y-axis: 2300mm (90.5”)
Z-axis: 1000mm (29.9”)
Spindle
spindle taper: CAT#50
spindle servo motor: 15/18.5kW (20/24.8 hp)
maximum spindle speed: 8000 rpm
Distances
between columns: 1800mm (70.8”)
from spindle nose to table top: from 200mm to 1200mm (from 7.87” to 47.2”)
Feed Rates
rapid X/Y/Z axis: 15m/15m/12m (590”/590”/472”) per minute
cutting X/Y/Z axis: 8m/8m/8m (315"/315”/315”) per minute
minimum increment: 0.001mm
Automatic Horizontal/Vertical Tool Changer
number of tool pockets: 40
tool change time: 8 second
maximum tool diameter with adjacent tools: 125mm (4.92”)
maximum tool diameter without adjacent tools: 200mm (7.87”)
maximum tool length: 350mm (13.78”)
maximum tool weight: 15kg (33 lbs.)
Coolant & lubrication
coolant tank capacity: 450l
hydraulic oil tank capacity: 70l
lubrication oil tank capacity: 8l
Miscellaneous
power required: 50kVa
compressed air: 7kg/cm2
hydraulics: 70kg/cm2
machine weight: 25000kg (55,115 lbs.)
Table
table size / t-slots: 3000 x 1500mm (118.1” x 59”) / 22
maximum load capacity: 9000kg (19,841 lbs.)
Travel
X-axis: 3200mm (126”)
Y-axis: 2300mm (90.5”)
Z-axis: 1000mm (29.9”)
Spindle
spindle taper: CAT#50
spindle servo motor: 15/18.5kW (20/24.8 hp)
maximum spindle speed: 8000 rpm
Distances
between columns: 1800mm (70.8”)
from spindle nose to table top: from 200mm to 1200mm (from 7.87” to 47.2”)
Feed Rates
rapid X/Y/Z axis: 15m/15m/12m (590”/590”/472”) per minute
cutting X/Y/Z axis: 8m/8m/8m (315"/315”/315”) per minute
minimum increment: 0.001mm
Automatic Horizontal/Vertical Tool Changer
number of tool pockets: 40
tool change time: 8 second
maximum tool diameter with adjacent tools: 125mm (4.92”)
maximum tool diameter without adjacent tools: 200mm (7.87”)
maximum tool length: 350mm (13.78”)
maximum tool weight: 15kg (33 lbs.)
Coolant & lubrication
coolant tank capacity: 450l
hydraulic oil tank capacity: 70l
lubrication oil tank capacity: 8l
Miscellaneous
power required: 50kVa
compressed air: 7kg/cm2
hydraulics: 70kg/cm2
machine weight: 25000kg (55,115 lbs.)
Standard + Included Equipment
- Fagor 8065 fully conversation control with 15” high resolution colour LCD
- 40 position automatic horizontal/vertical tool changer
- 90° automatic index angle milling head with automatic head changer
- automatic head exchange
- auto 5° index with booster cylinder
- 3500 rpm 1000Nm
- hydraulic tool clamp/unclamp
- programmable coolant system
- water/air gun for part/table cleaning with separate water pump
- automatic lubrication system
- spindle air blast
- work light
- status alarm/dwell/end of job light
- leveling bolts & pads
- double chip auger & chain type chip conveyor
- tool box with spanners & wrenches
- manual pulse generator (M.P.G. = electronic hand wheel)
- machine inspection lists
- operator manual
- control manuals + circuit diagram
- auto power off
- RS-232C interface
- USB interface
- hydraulic system
- air conditioner for electrical cabinet
- 300 psi through spindle coolant system
- full surround splash/chip guarding
being assembled with horizontal indexing head and automatic head changer at the Masteel Oakville warehouse (a brand new model not yet shown in the brochure - click on the U'Chine logo below)
while testing the automatic head changer (as the table is still covered in rust-coloured grease):
Scan this page's qr code and bookmark it in your smartphone for immediate access from anywhere at anytime:
